Use ARDEX Feather Finish for flash-patching, skim-coating and to fill in ridges, gouges, depressions and seams on virtually any type of subfloor.
Benefits of the Ardex Feather Finish Bag
- Self-drying finishing underlayment
- Creates a smooth surface for laying floor coverings on various substrates
- Formulated from a mix of Portland cement and hydraulic cements
- Boasts remarkable bonding strength
- Simple mixing and application process
- Requires water for mixing
- Achieves a true featheredge result
- Offers excellent coverage – up to 300 sq. ft. per bag*
- Resistant to mold and mildew
- Enables floor covering installation in as fast as 15 minutes
- Intended for indoor use only
How to Use
-
Mixing Ratio: For every 10 lb. (4.5 kg) bag of Ardex Feather Finish, you'll need to mix in 2 1/2 quarts (2.4 L) of water. This is the recommended water-to-powder ratio.
-
Smaller Batches: If you're working with smaller batches, you can adjust the mixing ratio. Use 2 parts of the powder to 1 part of water by volume for these cases.
-
Coverage: The product's coverage varies based on the thickness of application:
- At a thickness of 1/4", you can expect coverage of about 16.7 sq. ft. per bag (1.5 sq. m at 6 mm).
- If applied at 1/8" thickness, coverage will be approximately 33.3 sq. ft. per bag (3.09 sq. m at 3 mm).
- For a skim coat application, each bag can cover an area of 100-300 sq. ft. (9.2-27.8 sq. m). However, please note that the actual coverage might differ depending on the texture of the surface you are smoothing.
